GBand is a band-pass filter. It
removes frequencies from the input that are above or
below the specified cut-off points.
GChorus is a chorus effect. The
incoming signal is mixed with a delayed copy of
itself. The effect is created by modulating the
playback speed of the delayed copy.
GClip is a wave-shaping signal
clipper. It prevents the input signal level from
exceeding a specified maximum. The clipping function
used can be altered to have a hard- or soft-knee.
GComp is a combined compressor and
limiter for controlling the dynamics of an audio
GComp2 is a compressor featuring a
band-pass filter and a gate.
GDelay is a digital delay effect.
The delayed signal can also be fed-back into the
GDuckDly is a digital delay that
allows the wet signal to be compressed by the dry
GFader is a simple volume knob. It
has a range of -100 to 0 dB. The signal is silenced
at the minimum setting.
GGain is a simple volume knob. It
boosts or cuts the level of the input signal by up
GGate is a noise-gate effect. It
silences the signal when its level drops below the
threshold, given by the Thresh parameter.
GGrain breaks down the incoming
signal into grains and then reassembles it. A grain
is just a very short section of the sound, shaped to
GHi is a resonant high-pass filter.
It is used to remove all frequencies from a signal
below a given cut-off point.
GRevDly is a delay effect that
plays the delayed signal in reverse.
GSinth is a monophonic synth with
three sine oscillators. It also features an LFO for
controlling the output level.
GSinth2 is essentially the same as
GSinth, but with a few extra features. Most notably,
GSinth2 offers new oscillator types: triangle,
square and saw-tooth.
GSnap is an auto-tune effect. It
can be used subtly to correct the pitch of a vocal,
or, with more extreme settings, to create a
GTune is a chromatic instrument
tuner which operates much like its hardware
counterparts. It will automatically detect the pitch
of a note being played, and display the Western
scale note that it is closest to.